Can other devices that operate at 2.4GHz, such as a cordless phone, interfere with the Cameras signal?
Yes, possibly, other 2.4 GHz devices can distort the camera’s picture and/or cause buzzing in the audio. If you are experiencing interference between X10 cameras or Video Senders and some other equipment that uses 2.4 GHz, you might want to check the other device’s owner’s manual for the frequencies of each channel that it uses. X10 cameras and Video Senders use the following frequencies: Channel A: 2.411 GHz Channel B: 2.434 GHz Channel C: 2.453 GHz Channel D: 2.473 GHz We recommend using a frequency on the other device that is farthest from channel A or D, depending on which side of the band the other device is transmitting. Otherwise you will need to discontinue use of the device while using our video equipment. To change the frequency channel for the camera: Remove the rubber stopper on the base of the camera. Channel D is at the top and channel A is at the bottom. Replace the rubber plug if you want to use the camera outdoors. You also need to match the A-D switch on the Video Rec
