Can New cladding be fitted over asbestos cladding without removing the asbestos?
My suggestion is not to cover it up as you will definitely be causing more issues in the long run. If you have a standard asbestos siding they are between a 1 foot by 2 feet. These are not made of asbestos entirely (Mostly cement) and will not produce air born particles unless it is sanded, cut, drilled, or cracked. You must always take caution and beware of state or provincial law in your area if you begin to remove this siding units. They are normally nailed and they usually pop right off the wall as homewrap was not used at the time and the board and/or planks often are extremely dry or extremely damp and the nails usually pull right out. You should were a P100 mask at all times and a tyvek type suit. I do not recommend doing this on your own although you can if you take the proper percautions. Be careful and do not rush or begin the job until you are ready and prepared. Drapping a home will only be necessary if you have vermiculite asbestos insulation to remove as this is very haza