Can I use Tru Mark equipment to mark parking lots?
The Tru Mark E-100 can be used with water-based zone marking paints. To use zone marking paint or acrylic latex paint used for parking lot marking you must plug the front nozzle of the spray head with a solid disc spacer. Remove the current spray nozzle and flow control value with multi-purpose wrench and replace it with the spacer. The paint should be diluted 16 ounces of water or 16 ounces of latex paint conditioner for every gallon of paint used. You may or may not need to adjust the restriction plug set screw in the paint return line. Adjust the spray head to achieve your desired line stripe width. Since there may be slight paint dribble when disengaging the right handlebar control, it is recommended to reverse your direction for 6 to 12 inches so excess paint is applied to already painted section. [Top of Page] Q: “What makes your machine better than your competitors?” A: Simple design; ease of maintenance, simple clean up, no pressurized tanks to handle and maintain or gasoline e
