Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Can I use the Servenger Programmable Analog Module directly in my product?

April 26, 2017analog directly module Product Programmable servenger

0

Posted

Can I use the Servenger Programmable Analog Module directly in my product?

1 Answer

0

Posted

Yes, absolutely. The Servenger Programmable Analog Module is an excellent choice for small-run products and projects. Each Servenger PAM is shipped with an AC wall plug-in power adapter and an on-board +5V linear regulator. +5V power can be supplied from your system through the board mount connectors or the solder points provided for power wires. Remember to remove the jumper wire in series with the output of the +5V on-board regulator on the Power Terminal when you do this. The -5V for the input and output buffers is generated on board from +5V in either case. Shipped with each Servenger Programmable Analog Module are two 1 x 20 x 0.100 inch o.c. post header connectors that mate to the board mount analog and digital connectors on the Programmable Analog Module. You can use these to construct an inexpensive system prototype or a shippable product using perforated circuit board blanks from your local electronics parts store. This connects the Programmable Analog Module to additional cir