Can I use any sort of pump to power the BubbleBead?
Most appropriately sized pumps can be used. A suggested list is available in our Downloads section. – The head and flow rate of the pump should be within the range recommended. Low head pumps (e.g. under 4.0 metres on the smaller filters) do not always give as good results. – Solids handling pumps should only be used with an additional form of straining. – Very high pressure pumps are not necessary or desirable (they are often less economical to run). If the maximum pressure exceeds the table ratings, a pressure-relief bypass must be fitted. Pumps with heads exceeding 12m (10m on XS) must not be used, even if a bypass is fitted. See the Appendix in the Users Guide – Surface pumps should be installed so that the pump remains primed at all times, e.g. sited lower than the pool surface and not used with additional footvalves. – The pump is essential for the welfare of your fish, use a reliable model and have secondary facilities ready (e.g. spare pump; separate airpump) should your pump f
