Can I upgrade or downgrade the onboard 4MB display cache memory?
No, the system display cache is fixed at 4MB. I’ve turned the system on, but I’m getting no power (i.e., power supply fan does not spin). Make sure the cable from the case’s power switch is connected properly to the board’s power on jumper; refer to the motherboard manual. Try reseating the ATX power connector to the motherboard. Disconnect all the power connectors to your HDD, FDD, CD-ROM, etc. then try powering the system up. Try replacing the ATX power supply. How do I enable my USB ports? Windows NT 4.0 currently do not support USB. You can only use the USB ports if you’re using Microsoft Windows 98 Second Edition, Windows Me, Windows 2000, or Windows XP. Can I use just one DIMM? Yes, the system board will work with just one DIMM present. What is the system’s maximum memory capacity? It is 512MB using two 256MB DIMMs. What kind of DIMMs should I use? The system only accepts PC133, unbuffered, 3.3V SDRAM DIMM ONLY! Top of page Operating System Specific Questions I have an Unknown De
