Can I run DOS programs (like BPMODE) in Windows 95/98?
– If you have Windows 95/98 installed on your computer, you can still run all of the DOS based programs written for the BayPac. You will simply have to get to a “Real” DOS prompt (NOT a DOS “Window”!). To do this, you need to go to the “Shutdown” screen and select “Restart In MSDOS Mode”. If after doing this the program still doesn’t seem to work properly, you should try using a boot disk. See “Using A Boot Disk” in the “Troubleshooting” section below. I just received my BayPac. Will I need to adjust the Transmit Level? – It is VERY UNLIKELY that you will need to adjust the level control on the BayPac. The factory adjustment is correct for almost all radios of recent manufacture. Please don’t change the adjustment unless you are sure that it is needed! Remember also that the level control pot is small and fragile. Use a screwdriver of the correct size and don’t force it! Where should I set my radio’s Volume control? – The BayPac requires about 1 volt (p-p) audio from the radio for best
