Can i put honda alloys on a vauxhall combo van?
If the offset and PCD on the Honda alloys are the same as the Vauxhalll you should have no problem. Incase you don’t know the offset is the distance between the hub mountingface at the back of the wheel and the wheel’s centreline. It is usually stamped or engrave on the wheel and is measured in millimeters of ‘ET’ There are 3 types; Positive offset: Wheels with the mounting face toward the front face of the wheel. most front wheel drive cars have positive ET ZERO offset wheels have their mounting face even with the centreline of the wheel and are by definition “ET 0” Negative offset wheels have their mounting face toward the rear of the wheel. Rear wheel drive cars generally have this. PCD or pitch circle diameter is the diameter of a circle drawn through the centre of your wheel’s bolt holes. PCD is measured in millimeters and also indicates the number of studs or bolts the wheel will have. Also If you’re increasing the sise of your rims you will need to get lower profile tyres to ens
