Can I mount the Cruiserlift System to any Motor Coach?
No! The Cruiserlift System was designed and tested for use on most Class “A” Diesel Pusher, and a limited number of Class “A” Gas Motor Coaches. Most diesel pushers are equipped with a single continuous chassis frame that extends from the front of the coach all the way to the rear. These chassis frames are generally Semi Truck grade, and will handle the weight of the Cruiserlift System as well as up to a 1000 pound motorcycle. The exception to that rule is if the original chassis does not go the length of the coach, and a smaller extension was welded onto the main frame chassis over the last few feet of the coach. Under these circumstances the extension may not hold the weight of the system and motorcycle. Further investigation would be needed. Some Class “A” Gas Motor coaches have the original frame from front to back. If this is the case, and the GAWR (Gross Axle Weight Rating) on the rear axle will allow for the added weight, chances are that the system may be mounted. Some coaches
