Can I install aftermarket accessories like stabilizer “fins” to help my boat get on plane faster?
While these add-on devices may reduce the time it takes to get the boat on plane, they may also cause or contribute to abnormal or even unsafe handling of the boat and failure of the anti-ventilation plate. Using a product often referred to as a stabilizer fin is a modification of the gearcase that may change the manner in which the boat operates on the water. With the unit trimmed fully down (in or under), a reduction of the time necessary to get a boat on plane may result. However, some V-bottom boats using a stabilizer fin may exhibit a tendency to roll over far to one side as soon as planing occurs. The direction and degree of the roll will be dictated by prop rotation, weight distribution, and degree of trim under. The boat roll can cause passengers to be ejected. Trimming up or out can reduce or eliminate the roll. Because it is not possible to know how a given boat will respond to the use of such a product without thorough testing, Mercury cannot recommend that such products be
