Can I have some guidance on the number of autoVoIP systems needed to monitor my network?
– scaling the deployment to handle monitoring larger networks The solution required to monitor larger networks would need to include at least one autoVoIP system with Remote Management and a number of autoVoIP Probes Diagram showing possible deployment positions:- The autoVoIP deployment requirements will be subject to the available monitoring points on the network, for example you will need to establish:- • How you are going to connect each autoVoIP system into the network, e.g., using Switches (with Span Ports), Hubs and/or Taps – this will be based on where on the network it is possible to tap into the relevant traffic flow (i.e., Skinny and RTP/RTCP or SIP, SDP, RTP/RTCP frames) • Where the span ports are physically located. • What the capability of the span ports is, for example does it support RSPAN or VSPAN • How the span ports are to be configured to enable the autoVoIP systems to monitor the Skinny and RTP/RTCP or SIP and RTP/RTCP traffic flows. When deciding on the monitoring
