Can I change the paging or Dtmf codes myself ?
Yes. The ComStarG programming software allows you to change activation codes, as well as most timings and other parameters. The software works on computers running Windows 2000 or Windows XP operating system. Connection is made with either a serial cable or by a USB port. Back to Top Controlling high power loads. Each relay on the RXC can switch devices and equipment which draw up to 10 amps of power. Controlling lights, motors or other devices which need more than 10 amps is very easy. You just install a relay which can handle the necessary power, and wire the RXC to turn on and off the relay. In heavy duty applications, the relays are called “Contactors” or “Motor Starters”. Wiring diagram example to control heavy loads with the RXC-2000. Depending on your application, you may need to consult a qualified electrician to determine the correct size for the contactor. Your local electrician or electrical supply house may also have the contactor you need, or you may want to check www.Auto
