Can i build a shed base using paving slabs?
No slabs needed here just 6/8 stand concrete blocks some concrete mix and some mortar.Now pick a spot for your shed put a block in each corner measuring your 8×6 mark those,now take them up again and dig out some topsoil and put your concrete mix in holes dug bringing it back up to level of your grass.Leave to set.Put down first block and level it then lay 2nd block and level off the first by using a long piece of timber by placing it on top of both and adjusting level of the 2nd block to correspond with the first continue until 4 corners are level.Measure your 8×6 again and adjust your blocks to suit now measure diagonally from outside corner of each block keep measurement the same,pull aline from corner of first to corner of second block and move blocks so as they are just touching line,leave line and dig another hole half way between your 2 blocks and fill with your concrete mix again and lay a 3rd block there repeapt on opposite side your shed should now sit 4 inches off the ground
