Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Can Dump-Pro® be installed on a highway or farm trailer?

April 26, 2017farm highway installed trailer

0

Posted

Can Dump-Pro® be installed on a highway or farm trailer?

2 Answers

0

Posted

Yes. Although Dump-Pro was primarily designed to fit onto pickup trucks, it can be used on trailers. However, there are some things with which you need to comply: • Since Dump-Pro is not being installed on a pick-up truck, please make sure that the trailer is properly built according to U.S. DOT (Dept of Transportation) standards and is rated for at least the weight of both Dump-Pro and its intended load. Check for the NATM SEAL for verification. See . (Manufacturers proudly displaying this decal signify they comply with established industry standards and U.S. DOT’s Federal Motor Vehicle Safety Standards (FMVSS)). You must NOT overload either Dump-Pro or the trailer. • When Dump-Pro is mounted onto the trailer, it needs to be mounted to center the load over the suspension system and be positioned so that the tongue weight (either in the up or down directions) are correct for both the trailer and the towing vehicle. • You need to verify that the towing vehicle is rated

0

Posted

Yes. Although Dump-Pro was primarily designed to fit onto pickup trucks, it can be used on trailers. However, there are some things with which you need to comply: • Since Dump-Pro is not being installed on a pick-up truck, please make sure that the trailer is properly built according to U.S. DOT (Dept of Transportation) standards and is rated for at least the weight of both Dump-Pro and its intended load. Check for the NATM SEAL for verification. See . (Manufacturers proudly displaying this decal signify they comply with established industry standards and U.S. DOT’s Federal Motor Vehicle Safety Standards (FMVSS)). You must NOT overload either Dump-Pro or the trailer. • When Dump-Pro is mounted onto the trailer, it needs to be mounted to center the load over the suspension system and be positioned so that the tongue weight (either in the up or down directions) are correct for both the trailer and the towing vehicle. • You need to verify that the towing vehicle is rated