Can Danfoss solenoid valves operate by themselves or do I need to buy other things?
All Danfoss solenoid valves require electrical coils to work. The type of coil we recommend with the valve is noted on the valve product pages. A cable plug is also often required to fit onto the coil and is used for wiring up the electrical supply. In general we recommend using a filter with a solenoid valve, preferably a type with a removable element which can be cleaned. We also recommend a check valve if the solenoid will experience back pressure. All Danfoss solenoid valves have screwed connections so compression fittings are often required when used on tubing. Danfoss would also suggest that pipe work is properly supported and pipe clips are used where needed. Compression fittings and pipe clips can be sourced through your local premier distributor.
