Can alarms be set to warn of problems with a particular device?
Yes. The SNMP functionality includes a Trap Server for defining online status and performance limits. As a result, each device can be monitored in real-time, with definable performance limits set by the administrator for when to trigger notification I cannot discover a NWH2610 WEC using the IWMS utility. Make sure the WEC is powered on and connected to the Ethernet network. Check that the IP address of the PC station running IWMS is on the same subnet (identical subnet mask) as the IP address assigned to the WEC. The IPs should be unique as well. If the IP address of the WEC is unknown, reset the WEC by depressing the reset button on the back of the unit to obtain the factory default setting. Perform a Release / Renew of the IP settings of the PC running IWMS. For Windows based PCs, this is conducted as follows: Windows 98/ME Step Click Start/Run, type “winipcfg”, and click . The IP Configuration dialog box will open. Select the network adapter you use to connect to the WWB/WEC Pro or
