Are Thunder IV GX cards supported on Power Macintosh systems containing PCI slots?
No. No Radius Nubus products are supported in PCI systems under any circumstances. Q: Why do I get a green screen when attaching my Thunder IV card to an NEC monitor? A: NEC monitors are compatible with Thunder IV GX cards, but the following steps must be followed to resolve the green screen issue. 1) Newer NEC monitors ship with a DB15-to-HD15 cable. (A DB15 connection is fifteen pins in two rows; an HD15 connection is fifteen pins in three rows.) These monitors also have both HD15 and DB15 connectors on the back of the display. When using the monitor with a Thunder IV GX card, you must connect the DB15 end of the cable to the Thunder IV GX card (this is the only end of the cable which will fit) and the HD15 end to the back of the display. The standard NEC cable contains a multisync “cable sense” code, so no cable adapter is required. 2) The sync switch on the back of the display must be in the OFF position when using a Thunder card. Q: What changes were made to ROM version 1.2.3 on t
Related Questions
- I have a pre-G3 Power Macintosh computer, an OrangeLink USB 2.0/FireWire PCI card (95PCB00112) and the drivers seem to be installed properly but I cannot get any devices to work. Why?
- What is the fastest G4 processor that will run in an PCI Power Macintosh with a ZIF carrier card?
- Are PCI Express graphic cards supported on an AGP slot?
