Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Are there elevated levels of unhealthy mold spores in the air of the attic, crawl space, basement, and the various rooms of the home or other building?

0
Posted

Are there elevated levels of unhealthy mold spores in the air of the attic, crawl space, basement, and the various rooms of the home or other building?

0

Are the levels of mold spores indoors greater than outside levels, and/or different as to the types of mold species present? Your Certified Mold Inspector will use use a variety of mold testing techniques to collect mold air samples both indoors and outdoors [called outdoor control test]. The various best mold sampling techniques and technologies are: (a) mold culture plates upon which airborne mold settles onto after stirring up the air in the room with a disinfected fan for 15 minutes to 30 minutes; (b) controlled air testing impactors that use an air pump to draw in and impact airborne mold spores onto the sticky surface of a mold culture plate; (c) direct sampling of visually-noticeable mold growth through scraping of the suspect mold substance into a mold culture plate, or Scotch tape lift tape sampling, or actually cutting and saving a piece of what the suspect mold is growing on or in such as drywall, wood, carpeting, etc. • Is there mold contamination inside the building’s heat

0

Are the levels of mold spores indoors greater than outside levels, and/or different as to the types of mold species present? Your Certified Mold Inspector will use use a variety of mold testing techniques to collect mold air samples both indoors and outdoors [called outdoor control test]. The various best mold sampling techniques and technologies are: (a) mold culture plates upon which airborne mold settles onto after stirring up the air in the room with a disinfected fan for 15 minutes to 30 minutes; (b) controlled air testing impactors that use an air pump to draw in and impact airborne mold spores onto the sticky surface of a mold culture plate; (c) direct sampling of visually-noticeable mold growth through scraping of the suspect mold substance into a mold culture plate, or Scotch tape lift tape sampling, or actually cutting and saving a piece of what the suspect mold is growing on or in such as drywall, wood, carpeting, etc. • Is there mold contamination inside the building’s heat

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.

Experts123