Are there any known issues with the Netlock client for MacOS 8/9?
Yes, here is what we have discovered so far: The Netlock client does not support NAT transparency which means it cannot be used behind some NAT/PAT appliances and may be blocked by firewalls. If your NAT/PAT appliance (Cable modem and DSL router/firewalls are examples of such appliances) supports IPsec pass-through, you may enable this feature and see if it allows a successful VPN connection. Sometimes the Netlock client screen is not accurate (showing you that you’re connected when you are not, etc). Click the “refresh” button on the web browser to doublecheck the client’s status. “Normal” FTP doesn’t work with the Netlock client. You must configure your ftp client to use “pasv” mode for it to work properly. Refer to your ftp client documentation on how to do this.
• The Netlock client does not support NAT transparency which means it cannot be used behind some NAT/PAT appliances and may be blocked by firewalls. If your NAT/PAT appliance (Cable modem and DSL router/firewalls are examples of such appliances) supports IPsec pass-through, you may enable this feature and see if it allows a successful VPN connection. • Sometimes the Netlock client screen is not accurate (showing you that your connected when your not, etc). Click the “refresh” button on the web browser to doublecheck the client’s status. • “Normal” FTP doesn’t work with the Netlock client. You must configure your ftp client to use “pasv” mode for it to work properly. Refer to your ftp client documentation on how to do this.
• The Netlock client does not support NAT transparency which means it cannot be used behind some NAT/PAT appliances and may be blocked by firewalls. If your NAT/PAT appliance (Cable modem and DSL router/firewalls are examples of such appliances) supports IPsec pass-through, you may enable this feature and see if it allows a successful VPN connection. • Sometimes the Netlock client screen is not accurate (showing you that your connected when your not, etc). Click the “refresh” button on the web browser to doublecheck the client’s status. • “Normal” FTP doesn’t work with the Netlock client. You must configure your ftp client to use “pasv” mode for it to work properly. Refer to your ftp client documentation on how to do this. • Is there a GUI for the MacOS-X client? Yes, as of the 3.7 client release, a GUI is now available for MacOS-X. • Can I have multiple active VPN clients behind a Cable/DSL router using MacOS 10? This depends on the type of cable/dsl router, however, to be sure that t
Related Questions
- Yes, it is known as moving radar. Also, you can be clocked from the front or back of the patrol car. And the antenna is off until the officer turns it on and the radar is not emiting a signal until then. When the radar detector beeps its too late. You e had.
- Are there any known issues with running an IWS v2.5.1.2 Client on a Windows XP system?
- Are there any known issues with the Netlock client for MacOS 8/9?
