Are there any differences between the Acrylic Based Sheets and the Polycarbonate Based Sheets?
Beyond the size and thickness of the sheets, there are some important differences that should be considered depending on end usage application. Below are the main characteristics of the two products: ACRYLIC BASED MATERIAL: Harder Surface even in the Vertical Grade Material If surface is scratched it can be polished. It is ‘Thicker’ and looks ‘Richer’ .060 (1.6mm) can be cold formed (bent) around a 16″ radius, and if not carefully done can crack with expansion contraction where there is extreme fluctuation of temperature. The surface can comfortable be cleaned with a product like Windex® and a good quality Paper Towel without the fear of causing surface scratches. POLYCARBONATE BASED MATERIAL: Softer Surface. Surface will scratch more easily. Can slo be poilished but with more difficulty. Impossible to break or crack .020 (0.5mm) thickness can be easily formed around very tight radius’s without fear of cracking or damaging the surface. Substrate must be perfectly clean to avoid any iss
