Are there any basic requirements to maintain when I use the mobility anchor feature in order to configure wireless LAN controllers (WLCs) for guest access?
A. These are the 2 basic requirements that need to be maintained when you use mobility anchor in order to configure WLCs for guest access. • The mobility anchor of the local WLC must point to the anchor WLC, and the mobility anchor of the anchor WLC must point only to itself. Note: You can configure configure redundant anchor WLCs. Local WLC uses them in the order WLCs are configured. • Make sure you configure the same security policy for the service set identifier (SSID) on both the local and anchor WLCs. For example, if the SSID is “guest” and you turn on web authentication on the local WLC, make sure the same SSID and security policy is also configured on the anchor WLC. • For the mobility anchor feature to work well, make sure that the anchor WLC and the local WLC use the same IOS version.
Related Questions
- With the Management via Wireless feature enabled on wireless LAN controllers (WLCs) in a mobility group, I can only access one WLC from that mobility group, but not all. Why?
- Is it possible to assign an integrated controller in a 3750 Switch and a 4400 wireless LAN controller within the same mobility group?
- What is ZEN X-Fis Integrated Wireless LAN feature?
