Are the T2 bearings and PTFE coated shock bodies swappable with the T3?
The front shocks can be swapped but not the rear. The rear shocks on the T3 are slightly longer than the T2 rear shocks. 24 I have an old RC10T. I would like to know if I could use the T3 chassis or upgrade? If not what about the T2? The RC10T will not accept the T3 or T2 chassis. 25 How do I clean my truck? Use a paint brush or what ever brush will fit the area you are working on first to get the major dirt and grime out of the truck. When you want to really clean the truck you will need to remove the engine and electronics, then you can clean the truck with a basic household cleaner like Simple Green, 409, or an equivalent product. Be careful! These products have water in them so when you are done cleaning make sure you dry all the steel parts. You can even coat the steel parts with a light coat of WD40 or help prevent any rusting. Use a motor cleaning spray to clean your motor and just dust or blow off the electronic parts in your truck. 26 I was wondering if I could configure my T2
