Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Are the coin mech and bill validator plugged in properly?

April 26, 2017coin Mech plugged properly Validator

0

Posted

Are the coin mech and bill validator plugged in properly?

1 Answer

0

Posted

• Check all the plugs coming from and going to the validator and the changer there should not be any “extra” plugs coming from the changer or the validator; there may be one extra plug coming from the machine, which is used for an optional card reader. If they are all connected, make sure they are connected completely and correctly. You may have to disconnect them and check the pins inside the plug to make sure they are straight so that they can make a proper connection when plugged in. • Are the coin mech and bill validator powering up properly? • When the machine is powered up you should hear the bill acceptor “cycling.” You should also see a solid LED light on the bill acceptor telling you there are no errors with the bill acceptor, if the LED light is flashing then there is an error and the number of flashes tell you what the error is. • You should then check the coin changer and verify that the status LED light is on and/or flashing an error code. Again the number of flashes on th