Are the brake rotors for the KZ1300 or ZN1300 still available aftermarket?
As of late 2005, John at EBC said that they had no plans to stop making rotors for our bikes. Part #MD4089LS is the KZ1300 left front rotor, #MD4089RS is the right front rotor, #MD4090 is the rear rotor. For the ZN1300 Voyager, part #MD4091LS is the left front rotor, #MD4091RS is the right front rotor, #MD4092 is the rear rotor. Q: I need to bleed my brakes, but the screws are stripped in the front master cylinder cover. What can I do to get these out and what is the standard procedure for bleeding the brakes? Kurt E. A: I use an impact driver to loosen the screws. Another way it to use a punch and hammer drive the loose. You could drill and replace them, just make sure to leave enough to get a good ViceGrip on the shoulder of the screws after removing the cover. Now when you finally get the top off, remove all old brake fluid, it may be jellied. There are 2 small holes in the bottom to allow fluid into the bore of the cylinder. Make sure both are not plugged with that jellied brake fl
