Are oil consumption and blowby the same thing?
B.R., via e-mail No. Blowby is the process, and oil consumption is the result. But before discussing the difference, remember that all engines—even brand new ones—use some oil, so it’s not a matter of whether there is oil consumption but how much. It is the job of piston rings to separate the high pressures in the combustion chamber from the oil in the crankcase, while allowing a thin film of oil to remain on the cylinder walls for lubrication. Excessive oil consumption occurs when these rings, the cylinder walls, or both wear enough to let oil get past the piston and up into the combustion chamber where it is burned. A related form of blowby occurs when there is sufficient wear in the valve guides, valves stems, or both so that oil slips down the valve stem and into the combustion chamber. As an engine is placed under heavy load, cylinder pressures increase, which typically exacerbates blowby. Blowby is revealed by higher than normal oil consumption. You can often tell if it is the re
