Are NWLink and Gateway Service for NetWare or Client Service for NetWare installed?
When you install Gateway Service for NetWare or Client Service for NetWare and NWLink, the Auto Detect feature is enabled. For more information about Auto Detect, see “NWLink Auto Detect” earlier in this chapter. In most cases, Auto Detect detects the correct frame type and network number. However, problems can occur when a network is using multiple frame types or when an incorrect frame type is set manually. If NWLink detects no network traffic, NWLink sets the frame type to 802.2. To verify that the frame type is set to Auto Detect • In the properties box for your connection, double-click NWLink IPX/SPX/NetBIOS Compatible Transport Protocol . • On the General tab, verify that Auto frame type detection is selected as the adapter method. To determine the frame type set on the NetWare server • Connect to the NetWare server system console locally or connect to it remotely by using the NetWare Rconsole utility . • At the console, type: Config The frame type is displayed. To determine the
