Are Made to Measure covers easy to assemble?
Yes, just a No2 Pozidriv screwdriver is needed – but a power driver makes life easier; in either case DO NOT OVER TIGHTEN THE SCREWS. (tip; if the sections have a slight gap between them don’t be tempted to just keep tightening – reverse the screws out, hold the sections together and re-tighten the screws). Then you will need a drill for the wall fixings;- both wall mounted and the more usual floor standing covers use simple drop-on brackets which are fixed to the wall but allow the cover to be easily lifted off. There is a copy of the assembly instructions in the ‘News’ section.
Yes, just a No2 Pozidriv screwdriver is needed – but a power driver makes life easier; in either case DO NOT OVER TIGHTEN THE SCREWS. (tip; if the sections have a slight gap between them don’t be tempted to just keep tightening – reverse the screws out, hold the sections together and re-tighten the screws). Then you will need a drill for the wall fixings;- both wall mounted and the more usual floor standing covers use simple drop-on brackets which are fixed to the wall but allow the cover to be easily lifted off. There is a copy of the assembly instructions in the ‘News’ section. Tip; it’s easy for us to assemble covers single-handedly because we are used to it. If you are doing one for the first time a spare pair of hands makes life much easier.
