Any quick tips for installing “on-glass” antennas?
Remember: Install only on INSIDE of window. Do not mount antenna on any dark tinted area or on an area where an after market tinting film has been applied. Do not install over in-glass AM/FM dipole antenna. Do not install on glass with metallic content (passivated glass i.e. “solar-coat”, “solar-cool”). If possible, avoid installing antenna on curved glass. Clean inside mounting area with alcohol pad provided in the installation kit. Wipe off excess alcohol. Do not allow alcohol to dry on the glass. If window film is apparent, use a mildly abrasive detergent-type cleanser. Do not use ammonia-based or similar type of glass cleaner. Vehicle glass should be near room temperature (70 F / 21 C) prior to installation and remain at this temperature for 3 days following installation for maximum antenna-to-glass bond strength.
