Any hints on removing the intake cam?
• Here’s a confirmation on removing the cams without taking off the chain tentioner bolt on an ABS bike. I was able to remove the intake valve easily using this proceedure: • Pull on the cam chain to bring all the slack to the top • Use a 2mm allen wrench (or something with the same size) to lift the intake cam up from its slot as shown in the picture below (yellow circle). Note that you don’t need to lift it all the way out but just a couple mm up. Be very gentle, as it requires very little force. • Now insert the allen wrench into the front side of the same slit (green circle) to lift the cam out completely with, again, very little force.
