No fuel is being dispersed?
Solution: Insure the auger tube is primed. If it is, check for jams or that the lid is closed (the micro switch on the hopper will not let the auger run if open.) If not, press manual feed to prime the auger. back to top 2. My furnace keeps overloading the burn pot. Solution: First, check to see the air box ash drawer is in all the way. If so, check the moisture content of your corn. It should be 15% or less. Also make sure you are using clean corn. Otherwise this is mainly caused by improper combustion (See Damper Adjustment section of the Operations Manual). Besides the damper adjustment, there are several areas that can have an effect on the combustion process. Check all gaskets, doors and door latching systems for air leaks. Any leaks in these areas will negatively affect the burn process and cause the pot to overload. back to top 3. My furnace isn t burning and the number 2 LED light is blinking.
