What is a Water Chiller?
A water chiller can be defined as apparatus widely utilized for industrial water refrigeration. It is a complete water cooling system fully equipped with all requisite refrigeration utilities such as a refrigerant, condenser, pipes, pumps, coolant expansion reservoir and a lot more. Water chiller cools water to 20 degree Celsius temperature (68°F). Thereafter, it pumps the water via a hydraulic circuit to reach the equipment of process. Water chillers used for industrial purposes can easily circulate about four hundred tons of water. These units are priced at $2,500 and may go up with the features and other utilities attached to it. Water chillers may be bulky. Hence, they are usually designed in a fashion to be stored on the roof or side of any industrial building. The control operation of the chiller can take place from inside of the building. Today, water chillers have become the most demanded alternative for various industrial facilities. These units are cost-effective. Water chill
A water chiller is an industrial water refrigeration apparatus that produces cold water to cool industrial process equipment. A water chiller is a complete system filled with refrigeration equipment, including a condenser, refrigerant, pipes, coolant expansion reservoir, pumps, and so on. Water is cooled to temperatures around 20°C (68°F) and pumped through a hydraulic circuit to reach the process equipment. Industrial chillers can circulate as much as 400 tons of water. These units start at around US$2,500 and go up from there. Because some water chillers can be bulky, they are often designed to be stored on the side or roof of an industrial building and controlled from the inside. Water chillers are a popular alternative for industrial facilities growing fast enough that the move from city water to specialized chilling units becomes cost-effective. Water chillers are also a well-known alternative to evaporative cooling towers. They are often claimed to be superior to towers in that t
A water chiller is used in many industries to cool water for process control and cost savings. A chiller removes heat from the process water and transfers it to air via a heat exchanger. Using the refrigeration cycle, water chillers are able to cool the water to below ambient temperature. Water chiller capacities are measured in Tons of cooling. You easily can compute what size chiller you need from a simple formula (read more).
This sounds like you are trying to make an improper connection. I don’t know what a “water chiller” is for sure, I assume it is a device to cool your drinking water, and if so, you could create a cross contamination problem if you connect this to a hose. As far as the fittings needed, it would take a combination which isn’t too hard to do, but I’d proceed with caution on this. When a water supply line is split to be able to use water inside and for irrigation, a backflow preventer or anti syphon valve is required to keep irrigation water which can easily be contaminated, from getting back into the household supply.
