How Do You Make A Photo Ring?
• Select a photo bezel which will fit comfortably on the finger. Remove any bails. • Choose a photo and shrink it down to fit into the photo bezel. Be sure the image will not “bleed” when it gets wet. Laser copies will work better than inkjet. • Make a paper template before cutting the photo. Cut the template and try fitting it into the bezel. Gently tuck edges in with a toothpick. Avoid making it too big which will cause wrinkles or buckling. Trim down to the size you want. • Now cut out the actual photo using the paper template as a guide. • Try inserting the silver wire through the bezel to be sure of the fit. Do not attach wire yet. • Carefully pour out enough of the Clear Coating solution into the mixing cup. You must pour out exactly the same amount of the Activator solution into another cup. You can check amount by using an electric metric weigh. Follow manufacturer’s instructions and mix well. • Brush a layer of the glue to the inside of the bezel. Place the photo into the beze
