What is the CR axe?
Per Mick Strider: The CR is designed to be a hard substance destruction tool. The materials and construction are intended to give optimum impact and prying strength. The CR works as a system. The base of which is a .285″ thick 6AL4V titanium head, with .775″ thick cantilevered S7 impact bits. S7 is an incredibly strong material, most commonly seen on “Jackhammer” bits. The CR bits pivot on .312″ dia 416 stainless steel custom made shoulder bolts that have been tapered and crowned to protect them from impact and abrasion. The system is designed to remove all stress on the bolts by letting the bits pivot on the head and strike a steel anvil (bit) against a titanium anvil (head). In addition to removing bolt stress, this cantilever action also allows for a multi strike action of the bits. The initial strike is achieved with human force by swinging the tool against a surface. The secondary strike is caused by the inertial force of the collapsing cantilever system. By using this system, the
