Can the Urosensor be used in a pull-up?
The Urosensor is suitable to use in a pull-up. Simply cut a 1 inch (25 millimetres) slit in the pull-up in the crutch area, insert the point of the scissors into the slit, and moving the scissors from side to side, make a small tunnel into which you can insert the detector. To make sure that the Urosensor stays in place, it can be useful to tape across the slit once you have put the detector inside. The pullup has granules which are designed to absorb liquid and may keep the Urosensor too dry and fail to trigger. In this case either ensure the Urosensor is as close to the surface of the pullup as possible, or put in a minipad and stick that in the crutch of the pullup.
