Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How does PTZ work with the DVS?

April 26, 2017DVS ptz

0

Posted

How does PTZ work with the DVS?

1 Answer

0

Posted

Follow these steps to configure the PTZ function on the DVS: 1. Connect the PTZ device to the DVS. A sample connection diagram is shown below. Figure: Sample PTZ Device Connection Diagram 2. Configure the PTZ related parameters. Log in to the web GUI of the DVS, go to the PTZ page and configure the PTZ protocol and Baud rate according to the specs of the PTZ device. 3. Reboot the DVS. NOTE: 1. The FOCUS function may not work as many dome cameras support auto focus. 2. Press and hold the corresponding control button to adjust the pan, tilt, zoom and speed. Some notes when using SD cards / USB drives. NOTE: 1. The DVS only supports FAT32 formatted USB drives 2. The DVS supports SD and SDHC 3. It takes 10-15 seconds to read SDHC and USB drives with large memory capacities. Please wait 15 seconds to unplug the SD/USB drive after you plug them into the device. 4. If there are many files (ie. 1800 or more image batch files) on the SD/USB drive, it can take up to 5 minutes to read them. Pleas