How Do You Ping An IP Address?
You can ping an IP-Address by doing the following ways:
Open command prompt Start-run-type cmd and press Enter.In the command prompt window type ping ipaddress (or) ping servername.For Eg: ping 193.211.145.197 (or) ping abc.com.
If you have trouble using command interface,then you can do ping test easily from websites sites like WhoisXY.com .
A skill paramount to network troubleshooting is the ability to ping an IP address. Ping utilizes the ICMP ECHO protocol and simply sends a packet to a specified destination. The packet that is sent is called an ECHO_REQUEST. If the target destination is reachable, it will generate an ECHO_REPLY and send it back. When the ECHO_REPLY is received, connectivity between two hosts on a network is verified. Open up a terminal session on your Linux pc. This can be done by clicking on the terminal icon at the bottom bar or clicking on the home button and looking for “Xterm”. Once in the terminal, type “ping”; do not press enter. Press the spacebar and input any options you want to enable; do not press enter. These options can specify exactly how the packet travels the network. Press the spacebar and input the destination IP address. This is the IP address of the host with whom you want to verify connectivity Press Enter. This will initiate the ping command. Press the CTRL and ‘C’ keys simultane
