How Do You Put A Lift On A Car?
At first you need to keep various things with you in order to get all things perfect. Lug Wrenches with Floor Jack is used to safely lift the car. You can easily remove the wheels using lug wrench. Pencil and paper tool can also be sued to get all the thing perfect. visit here : www.qualitytire.com
Putting a lift on your car can give it a great sporty look while, at the same time, giving it better capabilities off-road. There are kits made specifically for an individual automobile, and others that are homemade, for example, out of hockey pucks. The recommended ones are obviously the ones made by manufacturers. These are safety approved. Step 1 Raise the vehicle and support it with jack stands. Remove the wheels, front shocks, front sway bar end links, and clamps for the front spring retainer. Next, the front track bar should be disconnected from the axle end. Remove the front springs. This job will be easier if you use some type of spring compressor. Support the front axle with jack stands. Remove the lower control arms that were factory installed that are to be replaced. Remove the brake lines that were installed by the factory and replace with the lines supplied in the lift kit. Watch the line routing, use angle brackets and e-clips to secure the lines. Step 2 The lower spring
