Power Supply Information?
2600 Input: 120VAC 60Hz Output: 9VDC 500mA Polarity: Center +, Outer – European 2600 [ATARI FUJI LOGO] PART NO.:CO 18084-319 AC/DC ADAPTOR INPUT: AC 240 V#50Hz 9W OUTPUT: DC 9V 500 mA BS415 [Polarity C+, O- diagram] FOR USE WITH MODELS CX 2600 XEP 80 OR SX212 WB JUN-AUG 87 7800 Input: 120VAC 60Hz 15W Output: 9VDC 1Amp Polarity: ————- – | o o | + —–|_|—– [looking into the power supply] If you are handy with a soldering iron, you can get a more standard jack and just solder it in parallel with the original connector, then buy a power supply at Radio Shack for a few bucks. One good place to solder alternate power connections is to the two joints on the underside of the board, located near the original power plug (the polarity is easy to follow because the traces from the power and to the barrel capacitor are polarity-marked). Either an external jack (1/8″ mono) can be run through the old jack’s hole (or a vent hole) -or- an internal jack can be installed where convenient suc
