Portfast and Other Commands to Fix Workstation Startup Connectivity Delays 99.9>Q: – , 1020?
>A: (Gleb Pijov)Question: How do you recover lost passwords on a Cisco 1020? Answer: As the Cisco 1020 is rarely physically secured, password recovery is done by calling Cisco and providing a system generated CHALLENGE. Using the override program, the support engineer can provide a one-time password to use to get into enable mode. Then, follow these steps: 1.Customer: Put up dip switch 1 and apply power. You should see “Console Username:”. 2.Customer : Login with Username “enable” and Password “override”. It will print a CHALLENGE. 3.Cisco runs the override program and prints a RESPONSE. 4.Customer: On the 1020, log in as “enable” and give the RESPONSE as the password. That will get you the # prompt, then you can do a wr t to see the current enable password. Or, you can do a config t and reset the enable password. 99.10>Q: MTU interface tunnel.>A: “Philipp V. Patrushoff”BugID: CSCdm54169>>> [13.09.2000] Vladislav Nebolsine, NB !!!>>> 11.3(11) 12.0(6)You cannot change the MTU size of a
Related Questions
- After installing EndNote and opening Microsoft Word, I do not see the EndNote toolbar or commands under the Tools menu. How can I fix this?
- Sometimes some sections are backed up on Windows startup regardless of their schedules. ow can I fix this?
- Portfast and Other Commands to Fix Workstation Startup Connectivity Delays 99.9>Q: - , 1020?
