How to replace eMate batteries?
[This manual has been written by Robert Benschop ( rbenschop@mac.com ]. To replace your eMate batteries you’ll need a torx 8 screwdriver and 4 NiMH batteries preferably with soldering lips on them of at least 1200 mAh (the higher the better) and basic soldering skills, nothing too fancy. Before you proceed with this, first make a backup (or if you’re the careful type, two) and then open the little lid on the back of your eMate next to the handle with the torx 8 screwdriver. Your battery pack is the dark rectangular shaped thing that lies in it’s own recessed place on the top (I’m considering the handle as the top side of the eMate) • On the right hand side you’ll see a couple of wires coming from the battery pack that attach to the eMate with a little white plug. • Slide the plug off so that you can lift out the battery pack. • Open the hard plastic outer casing so that you’ll have the actual batteries in your hands still in the plastic wrapping. • Cut away the wrapping, replace the ol
