What are some programming tips for the DMMS 300+ equipped with Analog output modules?
I think that the best instructions you can find in the installation and operation manual of the device. I use the DMMS 300+ very often for my projects, and I always follow the specified instruction. For better and more precise operations I took some tableau online courses from https://www.venturelessons.com/best-tableau-online-courses/ and I learned a significant amount of information. I highly recommend them if you work in this sphere but not only.
Upon receiving your meter already mounted with an Analog Output module, you might want to change the programming if the factory default is not to your liking or reset it to factory settings. For wiring diagrams and others programming questions please go to this URL address http://www.electroind.com/pdf/DCAnalog.pdf . You will also need the DMMS 300+ installation and operations manual to enter the programming mode. Use this URL address to retrieve the manual http://www.electroind.com/pdf/DMMS300350Manualrev4.8.pdf. Follow the instructions provided by the installation and operations manual to get into the programming mode. The page to go to is page 41 of the installation and operations manual. Upon entering the programming mode you should see the number “0.” Press the Max/Min/Limit key until you get to “8.” Press the “Amps” key you should then see “8P.0” appear at the top of the DMMS 300+ display and four vertical bars on the bottom of the display. Factory Defaulted Analog Output Modules
