How is Industrial OKO applied to a Tyre?
A. For large vehicles, the product is applied by using a Pressure Applicator Pump. By removing the Valve Core and immediately attaching the pump connector over the Valve Stem, OKO maybe applied against air pressure. It is not recommended to pump against pressures above 45 PSI (3.1 BAR).Therefore, if a tyre pressure is above 45 PSI (3.1 BAR), deflate the tyre until it is possible to pump against the remaining air pressure. The pump should be primed and then for each complete up and down stroke of the pump, 200mls of OKO is injected. It is best not to force the pump handle down nor apply rigorous or hard pressure. Subsequent to the OKO Application, remove the Pump connector and reinsert the valve core. Reinflate the tyre to the correct pressure.
